Associação de sistema biológico do tipo lodo ativado com reatores air lift e fotocatálise heterogênea com TiO2 para a remediação de efluente oriundo da produção industrial de TNT

Trinitrotoluene in the purification step (TNT) produced in industries, are carried out two washes at the end of the process. The first wash is done with vaporized water, which originates from the first effluent called yellow water, then the second washing with the use of sodium sulfite is performed (Na2SO3), generating a second effluent red water. This study aimed to study the individual effects, as well as the association of heterogeneous photocatalysis using TiO2 and biological treatment in air lift reactor using activated sludge (bacterial biomass) for the remediation of wastewater contaminated with nitroaromatic compounds in order to reduce toxicity and adjust the legal parameters according to regulatory agencies for disposal in waterways. The photocatalytic treatment was conducted by factorial design obtaining the best reaction conditions (pH 6.5 and concentration of TiO2 0.1 gL-1), with best results obtained at 360 minutes of reaction, reducing the absorbance 97.00%, 94.20% of the chemical oxygen demand (COD), 67.70% of total phenols, as well as a total reduction of observed peaks and assigned to nitroaromatic compounds by high-performance liquid chromatography. In the biological treatment, there was a 53.40% reduction in absorbance at 275 nm 10.00% 36.00% COD and total phenols in a short time (3 days), while for extended periods (48 days) there was an antagonistic influence on the results so that was the elevation of these parameters (COD and total phenols) instead of reducing. Chromatographic analysis confirmed the effectiveness of the biological degradation by reducing the peaks corresponding to compounds DNT and TNT. The Association of photocatalytic and biological treatments decreased results in the order of 91.10% absorbance, 70.26% of total phenols and 88.87% of COD. While the combination of biological and photocatalytic treatments generated relatively lower efficiencies, with 77.30% of absorbance reduction, 62.10% reduction of total phenols and a decrease of 87.00% of COD. In general, when comparing the chemical and biological processes in isolation, the photocatalytic treatment showed the best results. However, comparing the results of isolation and established associations, the association biological x photocatalysis showed more promising results in the treatment of red water effluent.

Alternativas de uso da borra de café através de hidrólise ácida, enzimática, ou como substrato para a produção das enzimas: lacase e celulase

In the industrial production of soluble coffee, huge amounts of extracted coffee residues are generated; onaverage, for eachtonne of green coffee extracted, 480 kg of coffee ground waste is produced. This is a solid residue currently used to generate energy at the steam boilers from the soluble coffee industry. Some is also used or as fertilizer on agriculture fields. Seeking a better end use, the work reported here aimed to study the viability of hydrolyzing the coffee ground residue for the production of carbohydrates. Hydrolysis was undertaken with hydrochloric acid at different temperatures and pressures, using a water bath or autoclave.An enzymatic hydrolysis with Viscozyme Lwas developed using Whatman filter paper No1 and the optimal conditions were determined using a rotational central composite experimental design (DCCR).The best conditions to hydrolyze filter paper cellulose were 50 FBG (Fungal β-glucanase) of Viscozyme L at pH 4.0 for 1.0 h and 45 ºC. The ground coffee was hydrolyzed under the same conditions as described above for filter paper, however this enzymatic hydrolysis was not efficient. A combination of enzymatic hydrolysis as a pre-treatment for the ground coffee followed by acid hydrolysis using HCl conducted in an autoclave (120 C for 2.0 h) resulted in higher production of glucose as analyzed by HPLC. Another end use of the ground coffee evaluated was as source of substrate in the culture medium to grow Botryosphaeria rhodina MAMB-05 to produce the enzymes laccase and cellulase. Highest enzyme titres obtained were with 8% (w/v) coffee grounds to which was added a minimum salts medium(Vogel), under agitation conditions (180 rpm) at 28ºC. The phenolic compounds present in the coffee grounds appear to have induced laccase by Botryosphaeria rhodina.

Material para construção civil a partir de lodo de estação de tratamento de água, lama de polimento de mármore e resíduo de produção de cal

The rapid population growth is the great motivator for the development of the construction industry and the increased demand for drinking water, resulting in a gradual increase in the generation of solid waste. Thus, this work was carried out in order to recycle industrial and municipal wastes incorporating them into materials for civil construction. The composite produced from water treatment sludge and marble polishing mud, applying lime production waste as a binder, was evaluated for its mechanical performance and its morphological structure. The raw materials were characterized for their chemical composition, mineralogy, morphology, particle size and also the moisture content. With the featured materials nine compositions have been developed varying the content of the water treatment sludge between 25 to 50%, marble polishing mud between 35 to 50% and the lime production waste between 10 to 30%. The composites were subjected to mechanical strength tests, water absorption, chemical and mineralogical composition and morphology. The developed materials presented, on the 3rd day of hydration, maximum strength value of 4.65 MPa, the 7th day 6.36 MPa, on the 14th day 6.74 MPa, the 28th day 5.98 MPa, on the 60th day 8.52 MPa at 90th day 11.75 MPa and 180th day 12.06 MPa. The water absorption values after 28 days of hydration ranged from 16.27% to 26.32% and after 90 days, from 13.57% to 23.56%.